Straight key and double contact
The hand does all the timing. The straight key moves up and down, the double-contact key is worked sideways, left, right. Each operator keeps their own « fist ».
The bug
A weighted pendulum makes the dots, the hand makes the dashes. The counterweight sets the speed of the dots. US patent 767,303, Horace Martin, 9 August 1904.
Paddles and keyer
A paddle is just a switch. The keyer completes each element automatically, puts a one-unit silence between them, and remembers the other paddle.
Iambic A and B
Two paddles pressed: the keyer alternates. A: on release, the current element ends, nothing follows. B: released during an element, one more element of the opposite type (Curtis).
Peso
Standard ratio 1:1:3. Weight lengthens elements and shortens silences, or vice versa. Set for one speed, it doesn't suit another.
Space
Readability depends on the regularity of spaces: 1 within a letter, 3 between letters, 7 between words. Too short, AN becomes P; too long, words fall apart.
Connection and grip
Common usage: tip = dots, ring = dashes, sleeve = ground (check the manual). Relaxed wrist, a light touch. Persistent pain: see a doctor.
Going further
The logic of the simulated keyer
At any moment, the keyer is idle, in an element, or in the one-unit silence that follows it. At the end of that silence it chooses: the memorised opposite element if there is one; the opposite element if both paddles are pressed; in mode B, the opposite element if both paddles were pressed together during the element; otherwise the pressed paddle; otherwise idle. The memory is taken on a fresh press of the other paddle during the element in mode A, and on any press in mode B: this is a variant chosen for this simulation, not a Curtis rule; details vary from one keyer to another. Curtis himself defines the two modes by what follows the release.
Reference cases, verified
Dot first, both paddles, released during the dash: .- in A, .-. in B (W1EUY's example). Dash first, released at the end of the second dash: -.- in A, -.-. in B (Curtis's C example). One dash, with a dot touched during it: -. in both modes (the dot memory). A dot held for 7.5 units: ..... A 5 ms press: a whole dot.
Weight, in figures
If weight adds a fixed duration w to each element and removes it from the silence, at 10 wpm (dot 120 ms) and w = 10 ms, dot 130 ms and silence 110 ms; at 50 wpm (dot 24 ms), dot 34 ms and silence 14 ms: the ratio goes from 1.2 to 2.4. Hence Curtis's remark.
Your fist
Analysis separates your presses into two clusters (k-means method on the logarithm of the durations): the short cluster gives the unit, and speed is 1.2 ÷ unit (s). Regularity compares each cluster's dispersion to its mean. Silences are read with the same unit: under 2 units within a letter, under 5 between letters, beyond that between words.